The primary purpose of the job is to produce quality parts by operating all ram extrusion equipment and running production jobs with minimal supervision.
** Essential Duties and Responsibilities
** :
Operate all ram extrusion jobs with minimal supervision.
Fill hoppers with material.
Properly complete paperwork.
Cut, weigh and record product and scrap as necessary.
Saw trim and/or fabricate production parts as required.
Enter in computer Statistical Process Control (SPC) data.
Prepare boxes and tubes for packaging and make labels.
Make adjustments to vise, water and heats.
Properly package and store parts and containers.
Understand and use set-up sheet.
Change and set-up wind-up reels.
Properly use measuring tools including measuring tape, calipers, average (pi) tapes, outside micrometers, and depth micrometers.
Perform general housekeeping duties such as sweeping floors, mopping water spills, emptying refuse containers, etc.
Maintain a safe and healthy workplace.
Maintain and comply with the quality system.
Exhibit positive, supportive behavior in all interactions with co-workers, supervisors, managers, and customers.
Perform limited die maintenance, including disassembly and reassembly, cleaning and polishing.
Clean extruder barrels.
Setup and operate small machines, including but not limited to hot-stamp, saws and drill press.
Adjust extruder temperatures.
** Non-Routine Tasks
**
Load and unload delivery trucks
** Minimum Requirements:
**
**
**
**
Experience/Education including licenses and certifications:
High school diploma or general education degree (GED).
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present to other employees of the organization.
**
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio and percent.
**
Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
**
Standing at length required. Walking, crouching, kneeling and lifting greater than 50 lbs. also required. Ability to reach with arms and use hands for manipulating machine parts. Speech and hearing required, primarily for communicating with supervisors and co-workers.
**
**
**7. Vision Requirements:
**
Close vision (clear at 20 inches)
Distance vision (clear vision at 20 feet or more)
Color vision (ability to identify and distinguish colors)
Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
**8. Working Environment:
**
Requires considerable alertness while working with machines and tools with hot or moving parts. Moderate to loud noise levels in plant area with continuous grinding and banging and intermittent high-pitched noise from saws.
**
**
This job description does not list all of the duties of the job. You may be asked by your supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this job description.
The employer has the right to revise this job description at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason.
**
**
**
**
**0%
**
**1-25%
**
**26-50%
**
**51-75%
**
**76-100%
**
Stand
X
Walk
X
Sit
X
**Use of Hands:
**
X
X
X
Reach w/ hands & arms
X
Climb or balance
X
Stoop, kneel, crouch or crawl
X
Talk or Hear
X
Taste or smell
X
X
X
X
X
| | | |
**
**
**Work Environment
**
**
**
**0%
**
**1-25%
**
**26-50%
**
**51-75%
**
**76-100%
**
Wet or Humid (non-weather)
X
Work near moving
mechanical parts
X
Work in high, precarious places.
X
Fumes or airborne particles
X
Toxic or caustic chemicals
X
Outdoor Weather Conditions
X
Extreme Heat (non-weather)
X
Extreme Cold (nonweather)
X
Risk of electrical shock
X
Work with explosives
X
Risk of radiation
X
Vibration
X
| | | |
You should be proficient in:
Machines & technologies you'll use:
...Salesforce Apex Technical Specialist Job Summary The Technical Specialist in salesforce apex development is responsible... ...with cross functional teams to integrate salesforce with other systems. 5. Perform unit testing, debugging, and troubleshooting of...
...you regarding Fulltime job opportunity . Please find details below and suggest me best time to connect. Title: Salesforce Developer Location: Seattle,WA / St. Louis,MO ( onsite from day 1 ) Fulltime with TCS Here is JD - The ideal...
Speech Language Pathologist Assistant (SLPA) We're seeking Speech-Language Pathology Assistants (SLPAs) looking for an opportunity to gain hands-on experience in a unique home health setting. This is an opportunity to create a balance that allows you to jump-start your...
...Lyra does not sell or share personal information as defined by the CPRA.Outside of the United States, for example in the EU, Switzerland and the UK, you may have the right to request access to, or a copy of, your personal information, including in a portable format;...
1. Successful experience in game community management and maintenance. Able to play the game in depth.2. Have a deep understanding of the functions of social media platforms and how to attract users through social media platforms.3. Rigorous and serious work attitude...